Tech Support Tip
Don't forget to fit the 470ohm resistors on the RS-485 bus on runs longer than 20m.
|
Installer Training
On a regular basis, we run fully day technical training courses designed specifically for installation company engineers (installation and service).
Click here to view current dates of when we are offering training...
The installer classes deal with specific Castle product ranges, programming and commissioning, hardware installation design, cabling, iD installation practice and fault finding techniques.
The classes are held at our Berkshire factory, run from 10.00am to 3.00pm, are free of charge and are open to any installer of Castle Care-Tech equipment. Class sizes are limited to 10 pupils per session, or on request we can offer on-site training at your desired location.
Click here to view maps to Castle Care-Tech
|
|
|
End User Training
If you are an Architect, Security Consultant, Security Specifier or End User Security or Facilities Manager, we are able to provide you with training specifically dealing with Security System Design.
There are no set dates for these courses, as they are set-up and arranged on request.
For any Installer or End User Training enquiries, please contact Castle by e-mail by clicking here and filling out the contact form
|
|
|
|
|