|
 |
The EE4204 receiver allows you to add a up to 4 high performance 868 MHz EchoStream
wireless transmitter to any application. With diversity reception and
advanced signal processing, Inovonics Wireless EchoStream technology is
designed to minimize "nulls" or dead spots in transmission areas.The LED
allows the user to quickly view the current status all 4 transmitters and the single button interface allows the user to easily review the fault status for any point.
With 5 flexible open collector outputs, the EE4204 receiver is a versatile
way of adding high performance wireless to your next installation. Case
tamper, jam detection, and internal antennæ results in secure wireless
implementation.
|
Open Field Range is
1 km - “Line of Sight”
|
-
Easy to install. There is no external programmer required.The transmitter is enrolled using a wireless
programming routine built into the receiver.
- Easy to use. LED’s show the current condition of the transmitter including activation, tamper, low battery,
and inactivity.
- Expandable. Enroll and supervise up to 4 wireless transmitters and repeaters and map the outputs using any of the 4 available open collector outputs that can be individually configured for your applications. One additional open collector output is used for fault reporting.
- Reliable. Transmitter supervisory “check-ins” and a transmitter specific supervisory “window”, defined
in the receiver, support sites with both removable pendants and fixed-position transmitters .
- Extendable. Compatible with a variety of transmitters including the intelligent repeater for extending the
range of all Inovonics Wireless EchoStream transmitters.
- Adaptable. Easily integrates into any panel system.
| Radio | |
Inovonics Wireless EchoStream using Pan-European 868MHz bands |
Housing
| |
|
Material
| |
ABS |
Closure
| |
Latching with optional screws for high security installs |
Dimensions
| |
165 x 89 x 25 mm |
Weight
| |
204 grammes |
Power Requirements
| |
10-14V DC |
Supported Transmitters
| |
4 |
Operating Environment
| |
0º - 60ºC
up to 90% relative humidity (non-condensing) |
Supported Transmitters
| |
4 |
Number of Outputs
| |
5 open collector N/O or N/C, (4 alarm, 1 fault) |
Sink Capacity of Outputs
| | 50mA per output at maximum of 14volts (not to exceed supply voltage) |
|
EE4204 Glossy Literature