Castle Care-Tech - Manufacturers of Intruder Alarms



   Intruder Alarms:
   Euro-MERiDIAN    
        Euro ONE
        Euro ONEplus
        Euro ONE IP
        Euro ONE 44
        Euro Mini
      'G' Range (EN50131)
     Key Features
           MSX Cards
        Legacy Euro
         Access Control
         PC Software
         Accessories
         iD Plus
  TouchScreen Keypad
          Flush Keypad
        ARM®
    Wireless / Radio
   Legacy Panels    
   Warning Devices:
   External Siren
   Castle care-Call
   Covert Alarms:
   Wanderer Unit
   Secura-Cap

NEW...

iD PLUS Marches On


Castle Care-Tech Ltd are pleased to announce that we are licensed users of the new iD Plus biscuits. The technology of iD has been extended, giving you the installer a much stronger and more versatile product, whilst retaining its simplicity of use and speed of installation.

Increased Area Coverage
iD plus will allow up to 30 biscuits on a total cable length of up to 400m (up from 100m), allowing you to protect a much larger area.

Lower Temperature Threshold
iD plus can operate in temperatures as low as -25°C, and in temperatures as high as 70°C.

Improved Biscuit Numbering
Each biscuit has clear, easily readable label, allowing quicker and easier iDentification.

Compatibility
iD plus biscuits are compatible with all Castle Care-Tech iD panels (except the 1700), and the biscuits can be placed on the same iD lines as the old iD biscuits.

Current Product Range
Our current iD range of Euro-MERiDIAN panels are:

Euro-10: 10 iD zones wired to the endstation
Euro-22: 20 iD zones wired to the endstation, remaining zones EoL
Euro-44: 30 iD zones wired to endstation, remaining zones EoL
Euro-134: 30 iD zones wired to endstation and 30 iD zones at each of three ZEMs
Euro-256: 30 iD zones wired to endstation and 30 iD zones at each of seven ZEMs



   Download the iD PLUS glossy
   Download the new iD PLUS installation guidelines
   Download the new iD Line Resistance Commissioning Chart
   View the iD PLUS Training Presentation
   Download the iD PLUS Training Presentation






Maximum Total Bus Length 400m (0.2mm2 cable)
Maximum Device Connectivity 30 biscuits/devices
Maximum Operating Temperature 70°C
Minimum Operating Temperature -20°C
Biscuit Weight 1g
Biscuit Dimensions h=53mm w=11m d=2mm (including leads)
iD PLUS marches on




Note:
If you are using a ZEM in iD mode, and if it is more than 10m from the endstation, it must be plugged onto a power supply (EUR-032)

Certificate allowing Castle Care-Tech to distribute iD PLUS technology

Return to the Home Page
Castle Care-Tech Ltd is a licensed user of iD Plus
The iD Plus logo is the trademark of Novar ED&S and is used under license from Novar ED&S