External proximity readers are fully sealed to IP65 for exterior use.
Green and Red LEDs indicate status of system when valid tag/card is presented.
Wires direct to the Euro RS-485 BUS.
Dimensions: 85 x 85 x 20 mm Note: The External Tag reader can only be used to unset one designated area, or all areas of the system.
This reader cannot be used with the Euro-10, Euro-12 or the Euro-ONE 28 when in iD mode.
Action
If currently unset
If Currently Set
Present Tag to Reader
Green LED lights
Red LED lights
Present Tag to Reader again
Green & Red LEDs light. Once set the green LED will go out, and the Red LED remains lit for 25 secs.
Red LED goes out and the green LED lights for 25 secs.
External proximity readers are fully sealed to IP65 for exterior use.
Green and Red LEDs indicate status of system when valid tag/card is presented.
Wires direct to the Euro RS-485 BUS.
Dimensions: 85 x 85 x 20 mm Note: This reader is designed for user with version 7 and above Euro ONE control panels only, if used on other panels then the red and green LEDs will not function correctly.
Action
If currently unset
If Currently Set
Present Tag to Reader
Green LED lights
Red LED lights
Present Tag to Reader again
Green & Red LEDs light. Once set the green LED will go out, and the Red LED remains lit for 25 secs.
Red LED goes out and the green LED lights for 25 secs.