Categories:
|
Category: Panel Programming
- The panel hasn't accepted the changes I have made...
- Can I disable all sounds and strobe on Exit?
- I cannot delete user code number 1
- The panel hasn't accepted the changes I have made...
When testing the panel, you will need to come out of engineering menu to save the changes to the NVM.
Thus if you make changes to the outputs, and then go to 'Test Outputs' menu, the changes won't initialise until you come out of engineering and back in again.
[ Top ] [ Main FAQ ]
- Can I disable all sounds and strobe on Exit?
Yes.
Go to Engineer Menu >> VOLUME CONTROL >> A Exit and set each 'exit' volume to zero.
Go to SITE OPTIONS >> Strobe Confirm and set it to 'NO'.
[ Top ] [ Main FAQ ]
- I cannot delete user code number 1
This code cannot be removed from the panel, only changed.
[ Top ] [ Main FAQ ]
|
