Categories:
|
Category: ARC Signalling Problems
- The ARC received the Alarm messages but not the restores.
- The ARC is not receiving misoperations (aborts)
- The ARC received the Alarm messages but not the restores.
Be sure that when testing the signalling don't silence the alarm immediatly, allow enough time for the panel to start signalling the alarm.
[ Top ] [ Main FAQ ]
- The ARC is not receiving misoperations (aborts)
Misoperation signals can only be sent if the panel is in alarm at the time. At the end of the 'confirmation time' the system re-arms itself (thus is no longer in alarm condition) therefore a misoperation signal cannot be sent. The confirm timer is set to 30 seconds by default on Euro-MERiDIAN panels.
[ Top ] [ Main FAQ ]
|
